Code 68 and no power steering with no fault codes

[RebeccaMeriva]

Hi there

 

I bought a 2013 Meriva B 1.3 Ecoflex and 500 miles later the power steering stops working and I get a Code 68.

Scan with Foxwell NT301 shows no trouble codes or pending codes.

New battery just fitted, stop/start AGM thats correct for the vehical.

Voltage on start up reaches 15v for about 30 seconds then settles down to 14.5 and eventually 13.7 (not sure how normal that is)

I'm wondering what my next step is.

 

Any advice much appriciated

Thanks!