Hi everyone from Australia.

I have a 1960 Cresta, and very proud of her. I have recently found that the oil filter for her is no longer made.

I am really hoping that others with Cresta’s have found either a supplier of an alternative or the collective buying power of special orders.

This filter fitted the PA / PAY motors as well as a number of Bedfords. May well have been used in many others I am not familiar with.

The RYCO filter number I have is R2065P. I am prepared to purchase in bulk.

If members are happy to pass the word on I would be very grateful. Thank you for your help.

Hi Vicki

And welcome to our club

I found this information online , I hope it might be if some help to you and your car

oil filter for 1960 cresta

+4

For a 1960 Vauxhall Cresta (PA model), the correct oil filter is typically a cartridge-type (insert) filter, often referenced by part number FF36 or CH837PL. These filters are designed for older Vauxhall 6-cylinder engines, which used a canister-style housing, unlike later screw-on filters.

Recommended Filters for 1960 Cresta (PA):

Flexolite FF36: A commonly cited replacement for classic Vauxhalls.

Fram CH837PL: A suitable filter insert.

MANN-FILTER H 1018/2 n: Another compatible filter insert.

Important Notes:

Filter Type: These are filter elements/inserts that go inside the canister, usually supplied with new sealing gaskets.

Verification: Always check your specific engine's filter housing to ensure the insert matches, as some older vehicles may have been converted to modern spin-on filters.

Availability: These filters can be found through classic car parts specialists, such as Flexolite or Stafford Vehicle Components.

a bit different engine from the one in my old PA Cresta (Jaguar V12) so can't offer any advice but SteveH has put some great info above - I'm sure there are still plenty of suppliers in the UK that still hold stock of NOS parts