Today I picked up some 600 grit wet and dry and a power red paint stick and some Isopropol alcohol.

Tommorow , I've told the missus if anybody phones for me " he s outside working on the motor ! "

I'll sand back the paint chips , clean with IA and then paint in some colour to build up level. Then I'll let it harden as the rest of the wet abd dry from 1000 to 5000 and some polish discs for the drill need to arrive in the post , but I'm hoping to make some very neat paint repairs.

...and how did you get on with it - any end result photos yet?

Hiya Not managed to do a thing yet sadly , all of a sudden work has got very busy, on weds morning I'm hoping to send and clean the marks and fill with paint and then colour cut at the weekend. I promise to post progress photos as I go along.

Finally had a spare 90 mins today to get work started on my paint chips , previous owner or dealer had touched a few chips in with touch up pen , but it was wrong colour of red ! And also there are some chips, small but thru to the white primer , so today (pics below) I cleaned the chips and rubbed down the wrong colour paint with Isopropyl and 600 grit wet and dry , and will now leave the new paint I touched in to dry and harden and when I get home at the weekend the papers up to 5000 grit and the polish and pads I ordered will have arrived and I can add more coats and cut and polish the paint in a bit better . More pics to follow at rhe weekend when I get to do stage 2 of this job. Pictures are before and after touch up and 600 grit sanding.