Jump to content

Recommended Posts

Posted

Hoping someone can point me in the right direction.

I have brought a mk4 astra van 1.7cdti sportive.

It had a cut out issue. I can drive it for a while then it will cut out and start back up after 10/15 seconds, but will only rev to 3 1/2 

I’ve changed throttle body, housing, Egr and pipe to the engine as it was coming up egr and maf fault. While doing this a blank plate (coke can) dropped out of the egr pipe. After this the van was fine for about 2 miles then back to same issue.

Someone mentioned crankshaft sensor so today I have changed that. Again 2miles down the road it cut out and again it started back up. I gave it some power to see how it would react and it blew the front rubber pipe of the throttle body! However I can still use full throttle and it’s not flagging up on the dash or on a scan! 

Thanks in advance!

Posted

Hi....welcome to the Forum

It does sound like a Crank sensor issue.
There could also be a cam sensor but a scan should give you fault codes.
If a code is present for a cam sensor then the cambelt might be slack causing the code to flag up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


test

×
×
  • Create New...