Latest Posts

I would be tempted to remove the socket and replace with a USB charger sock instead. If you are replacing the assembly then it doesn't matter about damaging what remains of the socket to remove it.

No, that is as it should be - the only time the pulley 'locks up' is when the pump is energise and locks into place when you switch the air con on. You will know if it is working as the engine revs will drop and the engine will sound laboured and also an audible click/clunk noise will be heard

My first thoughts were the belt tensioner being worn but you can see if this is happening because it will 'walk' towards the edge of the pulleys as soon as you run it up. Also look for any signs of a specific area that it is walking off - could be main crank pulley, Air Con, water pump, alternator, etc. This should give an indication of where the misalignment is present - sometimes known it to be some grit up behind the mounting bracket causing it to be misaligned.

Happy new year to you too Shiny ! Thermostats usually open around 80 degree centigrade but cooling fans rarely come on until around 100 degrees when the engine is hot due to idling when stationary without airflow. If you have Air Conditioning then the A/C fan would fire up occasionally to bring the interior temperature down

I know of oil additives that will clean the carbon from the piston rings and this can restore compression and cylinder sealing but it is just something you add to the oil and run for a while and then empty out and refill with fresh oil - but this is a £25 bottle of snake oil - which may or may not resolve your issue. Look up Forte treatments and you can see specs and benefits of their products

Please let us know what you find and how you get on with it all

Found loads of links on google search - https://www.google.com/search?client=safari&rls=en&q=vauxhall+GTE+at+carcave&ie=UTF-8&oe=UTF-8

My Sri 2015 1.4t c rear fuse box missing too? I have a Sri 2011 1.8 b that' got one?

Does anyone have a heat shield for sale for c18nz engine

Thank you for the xmas wishes Trevor. Hope you and your family had a great xmas too. Lets hope 2026 is a great year for the Vauxhall world. Hope you have a wonderful New Year, Andy.

already replied

Can anyone send me pics or diagram of where all the vacuum pipes go to etc. IE 2 on top hat 3 on throttle body 2 on inlet 1 on egr 1 on map and where the inline Carbon canister & 1 way valves Go etc. As all of mine were missing and have just cuppled them together to get her going.

Good idea print what you need at the time. Cheers I will give it a go.

I seen them on ebay, it also shows a wee spring, but mine must have took off when the button went !!! loads on ebay

I guess as long as it is still running fine and its purely maintenance tasks then it should be straightforward for a skilled mechanic to carry this out. Maybe even with the engine in situ - have you considered a mobile mechanic who can work on it a your premises...may be cheaper as well?

Hi, I have the same model/spec and had nothing but bother with all electrics. Same problem with boot. The car has been back at dealership since June and been told parts on back order! It seems to be a common problem with this car. Hopefully you get yours sorted soon.

I would say it is not unrelated as the aux belt will be turning the alternator pulley which in turn charges the battery so its a knock on effect - you will need to ensure the charging system is working properly before looking at any other faults

well at least you have a couple of options now. Good luck with it all and let us know how you get on with it

I would say that unless it is excessively smoking and it is clearly engine oil being burnt (oily exhaust pipe at the tail end) and the oil level is dropping then it may be a case of running it in until the rings bed in. Ensure that it is running the correct grade of oil and also run it on Supreme fuel which does make a difference.

maybe individual seals are available but otherwise if it is water ingress into the box then maybe silicon would be best to seal it - probably more effective and cheaper than new seals

cheers

Hi @JayBee Welcome to the club Good to have you onboard !

I would look on eBay to see if there are any available https://www.vauxhallownersclub.com/forums/index.php?app=core&module=system&controller=redirect&do=advertisement&ad=14&key=bf150e77c2c9100d0b9bba1b6bec636361396ad8842ba5936721c270c2221ece

Hi....welcome to the Club some cars are going to be a pain from the beginning (my hate is VW) and are plagued with problems. sometimes you get a good one and sometimes a bad one (Friday - Monday cars). Good to have you onboard and hope you can resolve some of the issues