Maurice Lowe

Hi all, any help, had code for map and baro, changed both, cleared code, still coming back. any idea's.

Hi all , THANKS FIRST OF ALL TO ANDYR, FOR ALL THE HELP, BEEN HAVING LOADS OF PROBLEMS WITH MY MERIVA B ,ALL DIAGNOSTICS, ANYONE , IS THE IAT FITTED WITH IN THE MAF.

Hi again, just wanted to find out how vauxhall owners are getting on with the new e10 fuel, and if they would recommend staying with e5.

Hi all, anyone know where the interior heater resistor is located meriva b 2010,

Hi all, meriva b , 2010 1.4 petrol, can anyone tell me which is the relay for engine cooling fan.

Hi, if this is same operation as meriva, apply by hand, release either by hand, or will release when pulling away.

Hi possibly from a breakers, if you go onto breaker line they will put a search out across the country, hope this helps.

Hi check first to see if you are losing any fluid , this will indicate a leak in the system., or clutch slave cylinder worn, can get replacement cylinder kit. Hope this helps.

Hi all, meriva b 2010 1.4 petrol, have a problem with engine light coming on, even after changing several sensors and both 02 sensors, any ideas please.

Hi can anyone tell me where the air intake temp sensor is located.

Hi have meriva b 2010 1.4 petrol turbo, had problems codes, but have changed several sensors, but codes keep coming back, any ideas were i could look next.

Hi all hope your all keeping safe and well, on my throttle pedal there is a small adjustment that can be made, if i do move it will it upset any of the settings. is there a set position for the pedal.

air temp sensor circuit 1 coming up , change mass air flow, still code p0111 any help please.

Thanks for the reply, much appreciated.