All Activity

Hi all, just bought a Corsa F registered Dec 2020. my Google pixel 8 phone connected via usb without issue. Samsung A15 appears to partially connect, icons appear at the bottom of the cars screen but no functionality... Tried a bunch of cables Inc Samsung branded and no improvement any suggestions welcome thanks Andy

I own an Astra elite 14.98( no turbo ). The car after a short run, and after being shut down. Will then cranks and not fire. If It is left for a couple of hours it then starts ok.

What speed does the Crossland 2021 auto box shift into 6th gear

Hello, just bought a 16 plate insignia, but it definitely needs some sort of trim or seal in the weather/drip runaways on the roof, where a roof rack would sit. Any ideas?

I wouldn't bother. It's out of date the moment you install it. Go for Android Auto and install Wayz on your phone. Up to the minute updates.

Can anyone tell me how much costs to update a built in Sat Nav,

Hello Members I have recently purchased a 6 month old Crossland 1.2 Ultimate and we have never had any traffic announcements or other information whilst driving. Also the clock did not change when BST started and had to done maually. All my previous Vauxhalls offered this. The settings are all ticked to get these messages also. Also the TA, RDS symbols do not light up. Has anyone else had this issue ? Thanks

Hello.. Living in Spain, but need a rear chrome boot lid part for a 2008MY Vauxhall Astra TwinTop. Seems like they are as rare as hens teeth.. Any advise where to look. Does the regular Astra hatch back chrome strip fit? Also in need of the lower mirror part on the left hand wind as it's broke and needs replacing. Would appreciate your advise, Kind Regards, Lee

Recently my car wouldn't start and this code came up p0402: excessive air flow egr. Seems to have sorted itself out but now I have noticed significant vibration between 60 and 70 mph. I have chang ed front wheels, immediately suspecting tyres, wheelbearings, bushes, control arm all seem fine but can't identify cause of vibration could it be anything to do with egr or maf?

Recently my car wouldn't start and this code came up p0402: excessive air flow egr. Seems to have sorted itself out but now I have noticed significant vibration between 60 and 70 mph. I have changed front wheels, immediately suspecting tyres, wheelbearings, bushes, control arm all seem fine but can't identify cause of vibration could it be anything to do with egr or maf?

Hi I used to own a Vauxhall victor 1962 FB series column change , I would like to get hold of one if anyone can help let me know please thanks.

Can anyone tell me if you can put another screen into a car as my screen doesn't have Bluetooth, thinking of using a second hand one ,is this possible??

I have recently purchased a 2018 Crossland with 54000 miles seems high oil usage. 3000 miles no light came on dipped the oil, not showing on dipstick.

Hello everyone just joined this club, very recently acquired my insignia elite, headlight washers are not working.ive Heald the washer arm longer but still not working,is there a dual pump or two separate ones,can anyone help me with this problem please.

Hi I am trying to track down a Drive Shaft Hanger Mount for a 1981 Vauxhall Chevette, sedan, 1256cc. These may also be referred to as a 'Hanger Bearing' I believe, although there is no bearing in them. They may also be called a 'central bearing damping ring'. The part I am looking for is shown with the red outline in the attached image - part 42. Appreciate if anyone could help me track one of these down. Cheers Brett

The panel that covers the OBD socket on my 2011 1.7 CDTi Auto is missing. I've looked on line and the cheapest s/hand replacement is 17 quid (Inc free scratches). Does anyone here have one for a more realistic price please? And don't mind posting. Also what is the 2 pin connector for? It looks like there's a light incorporated behind the panel for some reason - is that to illuminate the sockets?

Hi I have a 2017 insignia b sports tourer and the reverse light doesn't work . I have changed the bulb but this hasn't worked . Is there a fuse , I can find anything in the manual Thanks

I'm in the same situation. I spoke to a local auto electrician and he says it can't be done, he's tried it and had to mod wiring loom but still had warning lights on dash. I'm picking up a set of older insignia headlights 1ZT 011 165 and will try them out, My car has 1ZT 011 166-731 lights. I'll post back if it works out.

I'm in the same situation. I spoke to a local auto electrician and he says it can't be done. I'm picking up a set of older insignia headlights 1ZT 011 165 and will try them out, he's tried it and had to mod wiring loom but still had warning lights on dash. My car has 1ZT 011 166-731 lights. I'll post back if it works out.

Fitted watts links centre bush a year ago. Now rattling with excess play. Going to fit a new one but can't find new bolt which goes through axle. Tried e bay and all other suppliers but no joy. Bolt listed on one site as M12x161. Does anyone know if this is correct?. Called dealers and gave car details. Astra 1.6 J hatch 2013.Told him needed bolt for centre watts linkage bush... His reply.. "What's that" I explained in more detail... He said "That's a new one on me" I should send you an email with a picture and you can return it with the parts marked out you need. Needles to say never got the mail. Doh Can anybody point me the right direction? Ebay or usual online boys not listing unless you got a land rover.

Did you manage to get sorted? We also have the same problem.

I have recently had an error C0045-of for the rear left (or is it?) ABS sensor so replaced it and now the code has come back but before I go replacing the hub/reluctor ring, my question is what orientation does OPL Monitor use IE sitting in the car or viewing from the front of the car? and is it different because it was developed in EU so I guess they don't use such terms as nearside and offside, so any input on this welcome as I could have been barking up the wrong side of the car!

Maybe worth checking the replaced sensor connection is tight, correct, etc as not sure if the circuit is a series connection (meaning if one sensor is out the lot go out - like a christmas tree)

Manual says the 3rd fuse box is in the left hand side rear load compartment but it’s not there. Where else would it be.

I replaced the front nearside front parking sensor and now none of the front or back sensors are working! Help please