Jump to content

Recommended Posts

Posted

So, my newly purchased 2013 came with ‘extreme’ condensation trapped within both headlight units. Being somewhat cheap and always seeking the easiest remedy to nearly everything, I settled on removing all three round covers in the rear of each unit … one about 70mm and the other two about 30mm. I just left these off for a couple of warm sunny days and overnight. Sure enough, all the condensation is gone (for now). No doubt there’s some kind of water leak/s in each unit … but I’ll sort that later. I did also pull off the ‘rubber’ seals on each cover and rolled them back on themselves … thus putting the compressed surface (after twelve years’ use) in the back and the nice new springy surface now the working seal surface. I also put a light coating of lithium grease on these new surfaces before reinstalling. We’ll see how it goes. Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


test

×
×
  • Create New...