Jump to content

Recommended Posts

Posted

So, my newly purchased 2013 came with ‘extreme’ condensation trapped within both headlight units. Being somewhat cheap and always seeking the easiest remedy to nearly everything, I settled on removing all three round covers in the rear of each unit … one about 70mm and the other two about 30mm. I just left these off for a couple of warm sunny days and overnight. Sure enough, all the condensation is gone (for now). No doubt there’s some kind of water leak/s in each unit … but I’ll sort that later. I did also pull off the ‘rubber’ seals on each cover and rolled them back on themselves … thus putting the compressed surface (after twelve years’ use) in the back and the nice new springy surface now the working seal surface. I also put a light coating of lithium grease on these new surfaces before reinstalling. We’ll see how it goes. Cheers.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



test

×
×
  • Create New...