RebeccaMeriva

No, it cant do that. Its the Foxwell NT301 so really all it can do is read and reset trouble clodes. is there a way to do it without having to buy a whole new scan tool?

Hi there I bought a 2013 Meriva B 1.3 Ecoflex and 500 miles later the power steering stops working and I get a Code 68. Scan with Foxwell NT301 shows no trouble codes or pending codes. New battery just fitted, stop/start AGM thats correct for the vehical. Voltage on start up reaches 15v for about 30 seconds then settles down to 14.5 and eventually 13.7 (not sure how normal that is) I'm wondering what my next step is. Any advice much appriciated Thanks!

Hi gang So I bought a 2013 Meriva 1.3 ecoflex diesel with 140k miles, I was told it was perfectly fine and had some servicing done to make it issue free, I get it home and after 300 miles the power steering gives out and I get code 68. I noticed the PAS fluid was low so I topped that up. It didn't come back. I more recently notice the voltage jumps to 15.2v max then comes down to 14.4v after about 30 seconds to a minuet. The batterys charge at standing is 12.5v. I have a diagnostics tool in the post so will update this post when it arrives but if anyone is familiar with these issues and wants to give me some input I would really appriciate that. If you'd like any more info please let me know. Thanks a lot!