Maurice Lowe
-
Posts
16 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Posts posted by Maurice Lowe
-
-
Hi all , THANKS FIRST OF ALL TO ANDYR, FOR ALL THE HELP, BEEN HAVING LOADS OF PROBLEMS WITH MY MERIVA B ,ALL DIAGNOSTICS, ANYONE , IS THE IAT FITTED WITH IN THE MAF.
- 1
-
Hi again, just wanted to find out how vauxhall owners are getting on with the new e10 fuel, and if they would recommend staying with e5.
-
Hi all, anyone know where the interior heater resistor is located meriva b 2010,
-
Hi all, meriva b , 2010 1.4 petrol, can anyone tell me which is the relay for engine cooling fan.
-
Hi, if this is same operation as meriva, apply by hand, release either by hand, or will release when pulling away.
-
Hi possibly from a breakers, if you go onto breaker line they will put a search out across the country, hope this helps.
-
Hi check first to see if you are losing any fluid , this will indicate a leak in the system., or clutch slave cylinder worn, can get replacement cylinder kit. Hope this helps.
-
Hi all, meriva b 2010 1.4 petrol, have a problem with engine light coming on, even after changing several sensors and both 02 sensors, any ideas please.
-
Hi can anyone tell me where the air intake temp sensor is located.
-
Hi have meriva b 2010 1.4 petrol turbo, had problems codes, but have changed several sensors, but codes keep coming back, any ideas were i could look next.
-
Hi all hope your all keeping safe and well, on my throttle pedal there is a small adjustment that can be made, if i do move it will it upset any of the settings. is there a set position for the pedal.
-
air temp sensor circuit 1 coming up , change mass air flow, still code p0111 any help please.
-
On 6/4/2021 at 9:42 AM, Vauxhall Owners Club said:
I believe they are usually sold with the pedal.
Can you dismantle and clean up the existing sensor, I have successfully done this on Renault / Nissan before? -
Thanks for the reply, much appreciated.
-
can anyone tell me , can i bye the throttle position sensor on it's own, or is it the whole pedal.
Meriva b
in Vauxhall Meriva Club
Posted
Hi all, any help, had code for map and baro, changed both, cleared code, still coming back. any idea's.