elitedangerous Posted March 3, 2021 Share Posted March 3, 2021 Hi everyone I have an insignia 2.0d, I have issues regarding starting, it won't. I have gotten the following codes from my scanner P2282 (I replaced MAF sensor),P0101, P0403,P0193,P0113,P2100,P0344,P0016(REPLACED CAM AND CRANK SENSORS), P0336. I need advice as to which if any of these faults are related or 1 or more being a consequence of each other if that makes sense. I know my fuel filter needs replacing and I also think my timing belt also needs replacing. The car rotates but is not firing at all not even a whimper I just run the battery flat. My intention is to change the timing belt and fuel filter. Is this the best place to start and take it from there. I did have the dreaded low oil pressure problem but fixed that by replacing the pickup seal. Any help at all would be appreciated. Thank you. Quote Link to comment Share on other sites More sharing options...
Vauxhall Owners Club Posted March 9, 2021 Share Posted March 9, 2021 I would change the cambelt first as if it is slack it can generate codes for crank and especially cam sensor as the two are out of sync Also, ensure the fuel is going to high pressure pump....maybe also change the filter first to see whats in there Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.