Jump to content

Corsa d Warning Tones


Recommended Posts

There is a tiny speaker/beeper on my car’s instrument cluster pcb.This speaker gives the warning tones when a door is open or seatbelts are not fastened etc.The problem is I have lost these warning tones while warning lamps are good.Ι took out the pcb,desoldered the suspicious speaker/beeper and tested it with ohmmeter.The indication was infinite.This is all I’ve done and need your help.The part I’ve meusured,looks more like a buzzer,DIGISOUND is typed on it and some letters and numbers but without ohms and watts indication.Any ideas and advice is wellcome!

Thank you in advance.https://postimg.cc/XGyFKzRfhttps://postimg.cc/KkNK5h9ghttps://postimg.cc/rD1tp4SJ/fd91cad5

Link to comment
Share on other sites

Hi....welcome to the Forum

Infinite usually indicates an open circuit but not sure whether a buzzer would have a resistance and even then not sure what it should be.

I would be tempted to look on ebay for anything that looks similar and test it out on the board, worst case scenario it may operate at a higher or lower sound pitch

Let us know how you get on with it

Link to comment
Share on other sites

https://export.farnell.com/projects-unlimited/ast-030c0mr-r/loudspeaker-sub-miniature/dp/1192971?ost=100ohm+speaker&cfm=true

UPDATE!

Warning tones are back!

I put the above 100ohm speaker and,finally,I have my tones back,but with much less sound level!Tried to level up the sound on P7 secret menu but with poor essults.

I'm a little disappointed.

 

 

  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

test

×
×
  • Create New...