Jump to content

car will not start


Recommended Posts

hello every one i am new to this, I have sri 1.7 2011 car worked fine until i took fuse box out and disconnected the battery when i put it all back together the car would not start and the only code that is on is p2102. I am not sure if this is the reason why it does not start it does not even turn over. does anyone have any ideas please

Link to comment
Share on other sites

Hi....welcome to the Forum

Sounds like the system has lost its memory

P2102

Featured snippet from the web

OBD II Fault Code

The throttle motor is controlled by the engine computer (PCM). If the PCM does not see the requested movement from the throttle motor, code P2102 will set. The PCM may also put the engine into "limp home mode", limiting the available power from the engine to prevent unwanted acceleration.

I would ensure the fuse is securely located in position and the battery is fully charged and then try turning it over with the throttle pedal moving up and down smoothly to relearn the settings

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

test

×
×
  • Create New...