Jump to content

Bi xenon afl headlights


Allan c

Recommended Posts

Hi....welcome to the Forum

If the headlamps are high then there is an issue with the ride height sensors which automatically adjust the level of the headlights when the suspension alters to avoid blinding other motorists.
If one (or both) of the rear sensors is defective then this can cause the issue you are experiencing.

Best to take it to a reputable garage who should be able to identify if there is an issue with the sensors

Let us know how you get on with it

Link to comment
Share on other sites

Have a look at the front lower arms and rear link arms. There is a rod that goes to a sencor on each. On my signum the passenger side likes to pop off and then either leaves the light sat on the floor or sky high after they set the selves when you turn them on.. You can ajust the lights like normal lights but remember to alter back once you find the issue.. Opcom tech2 or global tis software should find your issue

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

test

×
×
  • Create New...