Jump to content

Hi All, Newbie needs Help!


Recommended Posts

Hi all

New to here and hoping for some help with an issue with my Insignia

I have been getting fault code P0402 intermittently for a while now. I have a bluetooth OBD reader so can cancel the code. 

I have replaced the EGR valve and also had the intake manifold taken off and all cleaned out

The code is still coming up and i have been told now it can only be the EGR temp sensor

Can anyone tell me where this is located as i would rather change it myself than pay someone to do it as it is only a screw in sensor?

Also if anyone might know is it worth cleaning it or replacing straight away

Thanks in advance all

Link to comment
Share on other sites

Hi welcome to the club 🙂 generic egr valve/sencor/dpf related...

 

My saab 93 use to pop this code up a lot.. Did egr clean plus cleaned any sencers and did about 5 forced dpf regens over a month,, i sold yhe car on after that so unsure if it was cured.... 

 

You might get a better read out using opcom vauxcom etc as it communicates properly with the canbus

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

test

×
×
  • Create New...